Why does the OUTER-CV JOINT break down so often? - emmity.com

  You probably don’t know anything about CV Joint. For those of you who know it, the CV Joint is a part of the car, also known as the constant universal joint . It is an important part of the car drive shaft. But a lot of car owner friends found : Such small parts are particularly vulnerable to damage. So the question is, why does the outside CV Joint of a car always get damaged?

 _{Figure 1 EMMITY CV Joint}

In fact, the outside CV Joint of the front wheel of the car is very durable under normal lubrication. The damage is also manifested by excessive wear, and excessive wear, for two reasons: One is the CV Joint sleeve missing and sealing is not strict, another is the rubber sleeve protection damage, once the rubber sleeve is damaged, not three months, the ball cage sleeve is waiting to scrap it!

_{Figure 2 EMMITY Stainless steel clamp}

However, this accessory is not expensive, the durability is similar, the difference is that the service life of the rubber protective cover of the car CV Joint boot universal joint depends on the full set of protection, the life of the CV Joint boot depends on the process and material.

_{Figure 3 EMMITY Boot}

And the CV Joint boot of the car is generally more durable, once there is damage, after the charge for the CV Joint set in about 2~3 years of life is just short of the CV Joint Boot, also about a year can be replaced if you buy the original factory parts, it is recommended to check for three months, the CV Joint Boot generally in the engine cover open can be seen!   

_{Figure 4 CV Joint kit}

Here we recommend EMMITY brand ball cage for you the pursuit of quality and cost-effective friends have benefits. EMMITY brand CV Joint has its own factory, and the production process strictly controls the quality of products. Heat treatment technology is applied to the CV Joint fairway, which makes the fairway more wear-resistant and greatly improves the bearing capacity. The dimensional accuracy is the same as your original car parts, the clearance fit is moderate, and the CV Joint rotates smoothly. Stainless steel clamp. Thick wall, tight clamp, no oil leakage.